Product ID:M-COAT G RESIN
MSDS Date:06/24/1985
FSC:8030
NIIN:00N053526
Kit Part:Y
MSDS Number: BVQVG

MEASUREMENTS GROUP

RALEIGH, NC 27611
US

Emergency Phone: 919-365-3800

Info Phone: 919-365-3800

Cage: 88952

MEASUREMENTS GROUP INC

WENDELL, NC 27591 US

Telephone: 919-365-3800

Cage: 88952

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 19.8%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

INERT FILLERS

Fraction By Weight: 6.6%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

PURE EPOXY RESIN

Fraction By Weight: 73.5%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN SENSITIZATION WITH REPEATED
EXPOSURE.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:SKIN: WASH AFFECTED AREA WITH SOAP & WATER. SEEK MEDICAL AID.
INGEST: CALL MD IMMEDIATELY (F PN). INHAL: REMOVE TO FRESH AIR.
SUPPORT BREATHING(GIVE O*2/ARTF RESP). EYES: FLUSH WITH POTABLE
WATE R FOR AT LEAST 15 MINUTES .

Flash Point Method:SCC
Flash Point:>220F,>104C
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:WIPE WITH ABOSRBENT MATERIAL CHLORINATED
SOLVENT - FLUSH OFF AREA.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN TIGHTLY CAPPED TUBES.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:ADEQUATE VENTILATION. USE NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST. MECHANICAL (GENERAL).
Protective Gloves:POLYETHYLENE OR NEOPRENE.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES.
Other Protective Equipment:NEOPRENE APRON.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Appearance and Odor:WHITE PASTE.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:STRONG FUMES OF SULFUR COMPOUNDS.

Waste Disposal Methods:REFER TO LOCAL, STATE & FEDERAL REGULATIONS
RELATIVE TO SOLID &/SOLVENT DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.